 FEATURES & BENEFITS |
Product is mixed with Portland or White Cement prior to application.
As Waterproofer
- Flexible - moves with any movements, sway and vibrations of the building.
- Elastomeric - stretches to cover cracks that develop after application of the Liquid Bond, with a water impenetrable membrane.
- Choice of colors as applied:
Gray - with Portland Cement.
White - with White Cement.
Any Color - with White Cement then tinted with Sinclair or Destiny tinting color.
As Adhesive
- Very strong adhesion - even for porcelain finished tile-to-tile.
- No need to remove old tiles in bathroom when retiling. Just apply over the existing tiles.
As Mortar Patch
- Strong and waterproof mortar for hollow blocks and bricks.
As Cement Plaster Additive
- May be mixed with cement plaster mixture in lieu of plain water to cure to a waterproof and sealing plaster.
- Plasters adhere better to the bare poured concrete or hollow block surface.
- Minimizes the need to apply putty on the plastered surface prior to applying paint.
|
| PRACTICAL USE |
- As Waterproofer - Mix with Portland or White Cement at 2 kg per liter of Liquid Bond.
- Apply by brush (2 coats).
- May be topped with:
a.) Concrete Topping.
b.) Tiles.
c.) Triple-X Chlorinated Rubber-based Paint.
d.) Bare (for non-foot traffic surfaces).
- As Adhesive - Mix with Portland Cement at 1.5 kg per liter of Liquid Bond.
- Apply on clean surfaces, about 1/16 inch thick by trowel, one square meter at a time, then attach new tiles.
- As Mortar Patch - Mix with Portland Cement at 1.5 kg per liter of Liquid Bond. Apply on hollow block surface as thick as necessary by trowel before mounting new block.
|
| PACKAGING |
- 1 liter, 4 liter and 16 liter.
|
| FAMILY AND RELATED PRODUCTS |
- 18 Epoprime - as Primer.
- DP-100 Series - Triple-X Chlorinated Rubber Paint as Topcoat.
|
| CAUTION |
- Normal cautions for paint products.
|
